Tempering valves mix hot water with cold water so the water that comes out of your shower head doesn’t freeze or scald you. Tempering valves are responsible for the warm water to which you look forward to coming home. There are a number of tempering valves that are available for different heat tempering requirements.
The tempering valve isn’t that difficult to install, especially if it will be connected to your existing electric heater, but call a professional if you’re not sure. All plumbing as well as electrical installation work should be carried out by a competent person in that case.
Installing the tempering valve would require certain necessary tools and materials like tempering valve, 2 pipe wrenches, pipe cutter (for new installation), Teflon tape, section of water pipe (for new installation) and 2 T’s (for new installation).
Turn off the water to the water heater by turning off the valve to the heater. Drain the water heater using an electric pump and garden hose. Also, close the valve to the hot water heater.
Take out the old and damaged valve using the pipe wrenches. For a newer installation, cut out a short section on the cold water supply line and the hot water supply line to allow for the T’s.
Install T’s in each of the two supply lines by following manufacturer guidelines for installation. A small portion of pipe is to be cut leaving some space for the tempering valve.
Affix the tempering valve to the section of pipe cut previously. Join this portion of pipe to both the cold and hot water supply lines. Use the same procedure to install the T’s as you have installed the T’s. Secure the pipe joints with Teflon tape. This will prevent the water leakage. Make use of the pipe wrench to tight the pipe joints. However, over tightening them, can damage the joints.
Turn the water back on. Test the valve by turning on the heater. Adjust the knob of the tempering valve to set the temperature as per the requirements.
Scott Rodgers is an author with ample plumbing experience all over the country. His exemplary guidance has established business opportunities for a lot of Armona Plumbers (Need one?click here!) and Avenal Plumbers (Need one?click here!).
Tags:
business,
career,
Gardening,
home,
home accessories,
home and garden,
Home and Plumbing,
home improvement,
Home plumbing system,
Home repair,
others,
plumbers,
plumbing,
plumbing issues,
Plumbing Solutions
March 14 2010 | Gardening | No Comments »
Installing outdoor lighting fixtures in your backyard serves many purposes. First, it enhances the look of your house at night. Second, it provides safety to the house from intruders. To avoid any chance of meeting accidents during night time, you should properly light up the backyard of your home. A variety of products are available in the market to serve the purpose. You can choose any kind of effective lighting fixtures.
The selection of the lighting fixtures must be made on the basis of your requirement. If the security of the area tops your priority list then choose the lighting fixtures that illuminate a wide area. Support the spread lights with the spots lights or the mini spread lights.
Before you commence the project, check the requirements of the area. Also, analyze the techniques that would be employed in the installation of the lighting fixtures. Use a flashlight to figure out the most appropriate angles for the installation of the chosen lighting fixtures. The beam of the light must be directed towards the ground. Also, two beams could be pooled to enhance the effect of lighting.
For aesthetic purposes, foot lights and tier lights could be used. Such lighting fixtures would be able to highlight the flower beds and pots. The whole theme of the backyard would attain a new appeal with the installation of such lighting fixtures.
Use flood lights and spot lights to illuminate the taller plants or trees present in your backyard. It will surely enhance the look of your backyard and would also render a dramatic look to your backyard.
When it comes to the small plants and trees then spot lights or focus lights would serve the required purpose. Such a setting would make the beautiful features of your backyard visible at night.
To focus on the ground from above, the best option is to place spread lights. This will highlight the ground. As safety concerns, do not allow children and pets in the vicinity of the work area as electric fixtures may give them a fatal shock.
The job of wiring may require some expertise. Hence, avail the services of an electrician whenever you run out of ideas. Time constraints apply to each and every technical project. Hence, abide by the defined duration of the project.
Scott Rodgers is a noted expert who has been authoring on electricians contents for a long time now. His exemplary guidance has given motivation to a host of workers, ranging from Snohomish Electricians to Hallandale Electricians.
Tags:
business,
career,
Electrical Issues,
Electrical Repair,
electrical safety,
Electricians Tools,
electricians works,
Gardening,
home,
Home and Electricians,
home and garden,
Home Electrical system,
home improvement,
Home repair,
others
March 09 2010 | Uncategorized | No Comments »